|
|
as requested, here is a repost of a config i'd been trying which seemed to hold the most promise, however, no ping. One suggestion was to use dev tap + tls +tcp, but no success. there is a firewall on each router, but ports have been forwarded, and i've tried with disabled firewalls without success ---begin original post: "I can get the two pc"s to establish a connection, but that"s as far as it goes. Here"s how the pc"s are set up. Office: Internet Router (192.168.3.1) Public and Private port 5000 fwd to: PC-A (192.168.3.3) Home: Internet Router (192.168.0.1) Public and Private port 5000 fwd to: PC-B (192.168.0.4) Here are the most recent configs: Office: remote pc-b.myvpn.com dev tun ifconfig 10.3.0.1 10.3.0.2 ip-win32 manual (did this to force the issue) secret key.txt ping 10 verb 3 mute 10 in various mutations, I"ve toyed with: route 192.168.0.0 255.255.255.0 10.3.0.2 and/or redirect-gateway with no success. Home: remote pc-a.myvpn.com dev tun ifconfig 10.3.0.2 10.3.0.1 ip-win32 manual secret key.txt ping 10 verb 3 mute 10 I"ve also tried different route and redirect commands on this side, with no success. As I"ve stated, the tunnel is established, but no ping, hence no real success. Additionally, the "status" of the tapi adapters on both ends is "Acquiring Network Address" ------end original post _______________________________ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com ____________________________________________ Openvpn-users mailing list Openvpn-users@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/openvpn-users |