|
|
> Den mandag 6.mar kl. 14:27 skrev Denis Oliana: > >> >> >> Jon Bendtsen schrieb: >>> Den mandag 6.mar kl. 13:59 skrev Denis O.: >>> >>>> Hi. >>>> >>>> I have just set up a OpenVPN Server (W2k3-Server) and a Client >>>> running >>>> xp. >>>> After struggling with the configs and routes I am now able to >>>> ping from >>>> the client to the server. My big problem now is, that I am not >>>> able to >>>> ping from the server to the client. Firewall is off. >>> >>> client or server firewall? >>> Check the routing table. >>> Use a packet sniffer to see where the packets are, meaning >>> do they leave the right net card interface? eth0? tun0? >>> Do they enter through the right one? >>> >>> >>> >>> >>> JonB >> Hello Jon, >> >> I have tried turning off both firewalls. Right now they are turned >> on again (with the proper holes of course). The routing tables also >> seems to be OK (see below). Do you see anything wrong in the configs? > > No i did not see anyhting in the configs, but i wonder a bit why > there are > 4 lines with 255.255.255.255 in the bottom of the routing table > > Anyway, try using a network sniffer and follow the packets. > > JonB Hi Jon, I have used ethereal now and I still cannot get any further. from the client side pings go out and show up on the server. (ping request + reply) The requests from the server don't show up on the client. The strange thing is, that when comparing the two packets (server reply & request) there are exactly the same. All information is correct. Now I do not have any clue on where to look next... regards, Denis ____________________________________________ Openvpn-users mailing list Openvpn-users@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/openvpn-users |