|
|
> -----Original Message----- > From: openvpn-users-bounces@xxxxxxxxxxxxxxxxxxxxx [mailto:openvpn-users- > bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Michael D. Berger > Sent: Sunday, June 10, 2007 8:54 PM > To: OpenVpn-Users > Subject: [Openvpn-users] MsWin Bridge Problem > > Under a Vigor router 192.168.1.1 . I have (among other things) > two Win2k boxes with IP addresses 192.168.1.30 and 192.168.1.40. > Outside, I have a laptop 192.168.2.20 with WinXp. > I just downloaded the latest OpenVPN. On 192.168.1.40, I > installed a server-bridge, and on the laptop I installed a > client. All of this is nested within an old Linksys router > 192.168.2.1 to simulate a WAN. The Vigor WAN IP addr is set to > 192.168.2.10 . The Vigor filter is set to pass all ICMP. Now > when I activate the VPN, this is the situation: > > 1. On the laptop I can click "My Network Places" to get to > 192.168.1.40 . > 2. On the Laptop I cannot get to 192.168.1.30 . > 3. Pings from the laptop to 192.168.1.30 or 192.168.1.40 fail. > 4. Pings from either 192.168.1.30 or 192.168.1.40 to the > laptop (192.168.2.20) succeed. > > I have ZoneAlarm on all these boxes, but the problem persists > when all software firewalls are shut off. > [...] Additional information: Running WireShark on the on the server TAP interface, I see that the client is sending NBMS packets with the name of the 192.168.1.30 box. I do not see an appropriate response. Mike. -- Michael D. Berger m.d.berger@xxxxxxxx http://www.rosemike.net/ ____________________________________________ Openvpn-users mailing list Openvpn-users@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/openvpn-users |