|
|
hi all, I set up openvpn in server mode. My configuration file for the server is shown as follows: local *.*.*.* port 1194 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh1024.pem mode server tls-server ifconfig 10.137.0.1 10.137.0.2 ifconfig-pool 10.137.0.100 10.137.0.200 push "route 10.137.0.0 255.255.0.0" client-to-client keepalive 10 120 comp-lzo user nobody group nobody persist-key persist-tun status openvpn-status.log verb 3 And the following is the conf for client: client dev tun proto udp resolv-retry infinite nobind user nobody group nobody persist-key persist-tun ca ca.crt cert client.crt key client.key comp-lzo verb 3 keepalive 10 120 Now, I start both the server and client, and succed as the verbose output show:"Initialization Sequence Completed". And I found that on the server there appears a new interface "tun0", whose inet address is 10.137.0.1 and P-t-P address is 10.137.0.2, while on the client side there appears a new interface "tun0" whose inet addres is 10.137.0.102 while P-t-P address is 10.137.0.101. Then I could not ping 10.137.0.1 or 10.137.0.101 from the client side and neither could I ping 10.137.0.2 or 10.137.0.102 from the server side. ______________________ OpenVPN mailing lists https://lists.sourceforge.net/lists/listinfo/openvpn-users |