Skip to main content

Video: Use CloudConnexa To Create a Site-to-Site Network With IP subnet Routing

Abstract

This video shows IP address-based routing working between two connected sites. CloudConnexa connects an HQ network and a Branch network, allowing the computers in each site to access the other.

This video shows IP address-based routing working between two connected sites. CloudConnexa connects an HQ network and a Branch network, allowing the computers in each site to access the other.

Date published:

02/12/2025

Functionality covered:

Adding Networks, Deploy Connector on Linux (Ubuntu), adding static routes

Description

Two networks are connected to CloudConnexa. Connector software is installed on a Linux computer running Ubuntu on each network. The Ubuntu computer is set up as a router, allowing for the traffic generated from computers on the network to be routed to CloudConnexa. As IP-based routing and Virtual Machines are being used, two things need to be ensured:

  1. A static route for the CloudConnexa subnets 100.80/12, 100.96/11, and the other network's IP subnet ranges as the destination and the private IP address of the Linux computer as the target (next hop) needs to be set in the gateway network's router.

  2. The source/destination checks in the virtual machine's network interface needs to be disabled.

Access Groups can be setup for each Network/Site so that only authorized applications can be accessed between sites.

Length

13:34

In this section: